*Polyimide Silicone adhesive film/tape(201,202,203)
*Polyimide Acrylic adhesive film/tape (204,205)
Grades of 201,202,203 are silicone adhesive coated Polyimide film, which
is nontoxic, free of pungent odor, harmless and environment friendly.
Due to it excellent wide temperature resistant property(-73 ˇăC to 268ˇăC),Silicone
adhesive Polyimide film/tape is broadly used a) in high temperature shielding
,such as the golden finger protection during PCB pass through the solder
oven. There leaves no residual adhesive when the tape is peeled off after
use. B)And for all electrical/electronic insulation
Grades of 204,205 as shown in table below is acrylic coated polyimide
film.
Grades Table & Specifications
Kapton polyimide film Adhesive Tape
| Product No. |
Adhesive |
Thickness
mm |
Length
m |
width
mm |
Peel strength
N/25mm |
Tensile strength
N/25mm |
Elongation
% |
Breakdown voltage
kv |
| Backing |
Total |
| 201# |
Silicone |
0.025 |
0.06 |
33 |
6-500 |
6.5 |
115 |
55 |
7.0 |
| 202# |
Silicone |
0.05 |
0.08 |
33 |
6-500 |
6.3 |
185 |
60 |
9.0 |
| 203# |
Silicone |
0.125 |
0.17 |
33 |
6-500 |
6.3 |
460 |
70 |
13 |
| 204# |
Acrylic |
0.03 |
0.06 |
33 |
6-500 |
6.5 |
115 |
55 |
65 |
| 205# |
Acrylic |
0.05 |
0.08 |
33 |
6-500 |
6.5 |
185 |
60 |
8.5 |
Both sides adhesive Polyimide tape: 201P,202P
201P: It is a double sides
silicone adhesive coated PI TAPE with imported special PET protectives.
Base material: 1 mil
Protective: 50 or 75microns PET films on both sides
Width:10-500mm
202P:It is a double sides
cilicone adhesive coated PI TAPE with imported special PET protectives.
Base material:2mil
Protective:50 or 75microns PET film on both sides
Width:10-500mm
Note:
1.Customer width is providable. (Min.width: 6mm)
2.Customer length is providable.
|
Polyimide/Kapton